Getting "No Work To Do" in Suse Linux after PC is imaged. And ZisWin has
entered the ZISDATA.

Starting from PXE.
The PC is going into a loop.
ZISData is OK.

The ZIMGBDB.LOG shows me that it is only reading the Server Imaging policy.
with a lot of errors.
OPAK-ZIS.OPAKOSLO.OPAKGRUPPEN exist but only as a unknown object in
ConsoleOne (questionmark).

Fri Nov 11 15:29:42 2005 -- [RPM]
Fri Nov 11 15:29:42 2005 -- [RPM] GWIL = 3640
Fri Nov 11 15:29:42 2005 -- [RPM] Workstation Information:
Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 5
WorkstationInformation.length ............... 3640
WorkstationInformation.Chipset .............. Intel Intel(R) Celeron(R)
CPU 2.66GHz 2666 Mhz
WorkstationInformation.Video ................ Intel Corporation Unknown
device 0x2772
WorkstationInformation.Network .............. Broadcom Corp Unknown
device 0x1600
WorkstationInformation.Soundcard ............
WorkstationInformation.Diskcontroller ....... Intel Corporation Unknown
device 0x27C0
WorkstationInformation.HarddriveSizeMB ...... 38166
WorkstationInformation.RAM .................. 248
WorkstationInformation.MACAddress............
0014:c255:f86c:0000:c0a8:1c21
WorkstationInformation.ipAddress ............ 192.168.28.33
WorkstationInformation.BootMedia ............ 0
WorkstationInformation.zenPartitionType...... 0x00
Fri Nov 11 15:29:42 2005 -- [GPM]
Fri Nov 11 15:29:42 2005 -- [AO] "OPAK-ZIS.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GPM] server
Fri Nov 11 15:29:42 2005 -- [RAD] Error -
603, "zendmSearchOrder", "Container Package:Search
Policy.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GPM] EP S
Fri Nov 11 15:29:42 2005 -- [RAD] Error -603, "zenimgPXEFlags", "Server
Package:General:Imaging Server Policy.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GPM] RAD failure, -603
Fri Nov 11 15:29:42 2005 -- [GPM] flags, 1
Fri Nov 11 15:29:42 2005 -- [GPM] state, 1
Fri Nov 11 15:29:42 2005 -- [GEMI] -1
Fri Nov 11 15:29:42 2005 -- [GPM] done, -1
Fri Nov 11 15:29:42 2005 -- [GPF]
Fri Nov 11 15:29:42 2005 -- [AO] "OPAK-ZIS.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GPF] server
Fri Nov 11 15:29:42 2005 -- [RAD] Error -
603, "zendmSearchOrder", "Container Package:Search
Policy.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GPF] menu
Fri Nov 11 15:29:42 2005 -- [RAD] Error -
603, "zenimgPXEMenuFilename", "Server Package:General:Imaging Server
Policy.OPAKOSLO.OPAKGRUPPEN"
Fri Nov 11 15:29:42 2005 -- [GEMI] -1
Fri Nov 11 15:29:42 2005 -- [GPF] done, -1
Fri Nov 11 15:29:42 2005 -- [RPM] PFPS = 2
Fri Nov 11 15:29:42 2005 -- [HC] done, PROXY_CMD_PXE_MENU
Fri Nov 11 15:29:42 2005 -- [HC] received PROXY_CMD_CLOSE
Fri Nov 11 15:29:42 2005 -- [ECC] close connection, 192.168.24.2
Fri Nov 11 15:29:42 2005 -- [ECC] CS
Fri Nov 11 15:29:42 2005 -- [LC] open connection, 192.168.24.2
Fri Nov 11 15:29:42 2005 -- [HC] received PROXY_CMD_VERSION
Fri Nov 11 15:29:42 2005 -- [HC] versions: 7, 7, -1
Fri Nov 11 15:29:42 2005 -- [HC] received PROXY_CMD_PXE_FILE
Fri Nov 11 15:29:42 2005 -- [RPF]
Fri Nov 11 15:29:42 2005 -- [RPF] GWIL = 3640
Fri Nov 11 15:29:42 2005 -- [RPF] Workstation Information:
Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 5
WorkstationInformation.length ............... 3640
WorkstationInformation.Chipset .............. Intel Intel(R) Celeron(R)
CPU 2.66GHz 2666 Mhz
WorkstationInformation.Video ................ Intel Corporation Unknown
device 0x2772
WorkstationInformation.Network .............. Broadcom Corp Unknown
device 0x1600
WorkstationInformation.Soundcard ............
WorkstationInformation.Diskcontroller ....... Intel Corporation Unknown
device 0x27C0
WorkstationInformation.HarddriveSizeMB ...... 38166
WorkstationInformation.RAM .................. 248
WorkstationInformation.MACAddress............
0014:c255:f86c:0000:c0a8:1c21
WorkstationInformation.ipAddress ............ 192.168.28.33
WorkstationInformation.BootMedia ............ 0
WorkstationInformation.zenPartitionType...... 0x00
Fri Nov 11 15:29:42 2005 -- [RPF] calling GIW

Regards Roar Skaare

On Fri, 11 Nov 2005 14:48:45 GMT, roars@stover.no wrote:

> OPAK-ZIS.OPAKOSLO.OPAKGRUPPEN exist but only as a unknown object in
> ConsoleOne (questionmark).

does it have rights to the root?

on the other side this doesn't really matter as pxe thinks that your wks
doesn't have image save data..

can you confirm with zisview that you have image save data... especially
wks object, treename etc.. and which version of image save data?
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

"Marcus Breiden" <zenworks@edu--magic.net> wrote in message
news:1uuzelb17ui0e$.dlg@supportforums.novell.com...
> On Fri, 11 Nov 2005 14:48:45 GMT, roars@stover.no wrote:
>
>> OPAK-ZIS.OPAKOSLO.OPAKGRUPPEN exist but only as a unknown object in
>> ConsoleOne (questionmark).
>
> does it have rights to the root?
>
> on the other side this doesn't really matter as pxe thinks that your wks
> doesn't have image save data..
>
> can you confirm with zisview that you have image save data... especially
> wks object, treename etc.. and which version of image save data?
Yes ZISDATA is correct.
But the problem first appear after the ZFDAgent (ZISWIN) has written data to
ZISdata (sector6).
And the imaging policy assosiated to the WS is working (if i "Check for
imaging work on next boot".).

But the server imaging policy/PXE is going into a loop.


> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

On Mon, 14 Nov 2005 08:19:26 GMT, Roar Skaare wrote:

> Yes ZISDATA is correct.
> But the problem first appear after the ZFDAgent (ZISWIN) has written data to
> ZISdata (sector6).

so it does work... you bring down one image and than it stops working?

> And the imaging policy assosiated to the WS is working (if i "Check for
> imaging work on next boot".).
>
> But the server imaging policy/PXE is going into a loop.
what do you mean by that... sorry.. just battleing the language barrier ;-)

--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

This is the prosess of a WS imaging:

10:10 Ziswin. cleared Image safe data on WS.
10:15 imaging WS (OK)
10:19 reboot PC (PXE exit, loading from HD)
10:20-10:22 Sysprep running
10:23 Rebooting PC (PXE exit, loading from HD)
10:23-10:26 Intalling NW client 4.91PS1 and ZFDAgent.
10:26:40 Rebooting PC (PXE exit, loading from HD)
10:27:40-10:31:00 Autologin Deploy user, ZWSREG runs and
WS is imported into correct OU.

10:32:21 Rebooting PC (PXE exit, loading from HD)
10:34:11 Login as User Zisdata, populated with:
Windows SID
Just imaged flag=No
Scripted image flag=Yes
Version=8
Script Checksum=1573899387
Imaging agent is enabled and will run on next boot.

10:39:34 Rebooting PC (PXE exit, loading from HD)
10:40:10 Ziswin runs and populate data to ZisData.
Version=8
Just image Flag=No
Scripted Image Flag=Yes
Script Checksum=1573899387
Workstation Tree=OPAKAS
Workstation Object=CN=WS-CZC5402S3D.OU=Workstations-
XP.OPAKOSLO.O=OPAKGRUPPEN
workstation Object ID=41245de9e692847c14ad33cd5fb40b44
NETBIOS Name=WS-CZC5402S3D
Workgroup=NODOMAIN
Windows SID=83886080-21-1056285110-175378768-2567992596
Uses DHCP=Yes
DNS Host Name=WS-CZC5402S3D

The imaging agent is enabled and will run during the
next boot of this computer

10:52:55 Rebooting PC (PXE finds out that the PC shuld do imaging
work , Linux loads and )
10:54:10 (Linux loaded. "No Work to do" from Linux)

WS is now looping forever PXE-Linux-"No Work To Do"

_____________________________________________

Booting into WindowsXP.
Ziswin shows:
Version=8
Just image Flag=No
Scripted Image Flag=Yes
Script Checksum=1573899387
Workstation Tree=OPAKAS
Workstation Object=CN=WS-CZC5402S3D.OU=Workstations-
XP.OPAKOSLO.O=OPAKGRUPPEN
workstation Object ID=41245de9e692847c14ad33cd5fb40b44
NETBIOS Name=WS-CZC5402S3D
Workgroup=NODOMAIN
Windows SID=83886080-21-1056285110-175378768-2567992596
Uses DHCP=Yes
DNS Host Name=WS-CZC5402S3D

The imaging agent is enabled and will run during the
next boot of this computer



Once the ZisData is populated with Workstation Object and Workstation
Object ID, the looping starts.

It seems to me that the PXE boot cannot find the WS in the tree
(cannot read zisdata).

Has this someting to do with the SERVERNAME-ZIS object ?

This object is missing snapin in consoleOne (questionmark object). Or is
not working as it shuld ?

How can i veryfy that this object is working as it shuld ?

Do you need the ZENPXE.LOG and ZIMGDBG.LOG of the prosess described (it
is a litle to big to post in this forum) ?

Regards Roar Skaare STOVER AS.

On Mon, 21 Nov 2005 11:32:54 GMT, roars@stover.no wrote:

> 10:52:55 Rebooting PC (PXE finds out that the PC shuld do imaging
> work , Linux loads and )
> 10:54:10 (Linux loaded. "No Work to do" from Linux)

as linux is not finding the wks but pxe is..

how does your rule look like?

the zimgdbg.log would be nice...

you can mail me if needed but remove one of the - first...
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

My rule is "BIOS Serial number - Contains - CZC540" AND
"CPU - Contains - Intel"

You wrote. you can mail me if needed but remove one of the - first... (
remove one of the - first.. ?)

If you send me a mail, i can replay to that mail, i don't have your email
address.

Regards Roar Skaare.



> On Mon, 21 Nov 2005 11:32:54 GMT, roars@stover.no wrote:
>
> > 10:52:55 Rebooting PC (PXE finds out that the PC shuld do
imaging
> > work , Linux loads and )
> > 10:54:10 (Linux loaded. "No Work to do" from Linux)
>
> as linux is not finding the wks but pxe is..
>
> how does your rule look like?
>
> the zimgdbg.log would be nice...
>
> you can mail me if needed but remove one of the - first...
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

On Thu, 24 Nov 2005 07:29:19 GMT, roars@stover.no wrote:

> You wrote. you can mail me if needed but remove one of the - first... (
> remove one of the - first.. ?)
>
> If you send me a mail, i can replay to that mail, i don't have your email
> address.

my email is on every post I do.. mail on it's way..
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

On Thu, 24 Nov 2005 08:38:20 GMT, Marcus Breiden wrote:

> my email is on every post I do.. mail on it's way..

hmm... is the log from only one try?

also try to get rid of the biosAssetTag / Serial Number in the rule..
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

> On Thu, 24 Nov 2005 08:38:20 GMT, Marcus Breiden wrote:
>
> > my email is on every post I do.. mail on it's way..
>
> hmm... is the log from only one try?
>
> also try to get rid of the biosAssetTag / Serial Number in the rule..
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net
__________________________________________________________

The ZIMGLOG.XML is not only from the process described.
Thwe other 2 log files are only from the process described.

I have not eny biosassetTag or Serial numer. Same problem appear.

This must have to do with the ZISWIN.EXE.
The problem appears after the ZIWIN has updated the zisdata on the WS.
But i can not se any thing change in ZisData.

Regards Roar Skaare

On Tue, 29 Nov 2005 07:38:43 GMT, roskaare@online.no wrote:

> The ZIMGLOG.XML is not only from the process described.
> Thwe other 2 log files are only from the process described.
>
> I have not eny biosassetTag or Serial numer. Same problem appear.
>
> This must have to do with the ZISWIN.EXE.
> The problem appears after the ZIWIN has updated the zisdata on the WS.
> But i can not se any thing change in ZisData.

ok... can you send me the log without bios tag and only one try?
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

When the WS is looping:
The DTS.LOG tells me that it can not find any ZISDATA.

When i log in to WindowsXP and run ZISWIN all the data are pressent.
And correct. (It dosent help to modify it)

When i run ENGL ZISD viewer. It is telling me that thre are no ZIDATA.

When i go into ZISEDIT (Linux) all the ZISDATA are pressent and correct.
(It dosent help to modify it)

This happends after ZISWIN.EXE has collected information from WindowsXP
and put it into ZISDATA. (WS tree/WS obj/WS obj id/NETBIOS
name/Domain/Windows SID).

This only apply for HP DC7600 who are a PC with SATA disk controller.

To me it seems like the problem are caused by ZISWIN.EXE, or that the DTS
cannot find any ZISDATA on the DC7600. This happends only after ZISWIN.EXE
has collected and saved data to ZISDATA.
Any tips ?

Regards Roar Skaare.

On Fri, 02 Dec 2005 09:07:15 GMT, roskaare@online.no wrote:

> This only apply for HP DC7600 who are a PC with SATA disk controller.
>
> To me it seems like the problem are caused by ZISWIN.EXE, or that the DTS
> cannot find any ZISDATA on the DC7600. This happends only after ZISWIN.EXE
> has collected and saved data to ZISDATA.
> Any tips ?

I know that in zdm 7 they changed the location of ZISD... it uses the old
sector and a new one..

that's why I asked for the dinic.sys date... was thinking it was perhaps an
old one..

so let me ask..
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

On Fri, 02 Dec 2005 16:49:46 GMT, Marcus Breiden wrote:

> I know that in zdm 7 they changed the location of ZISD... it uses the old
> sector and a new one..

hmm... which version of the engl tools are you using? you can also use
ziswin itself to show the ZISD...

also we wonder if anything is blocking the sector 6 access... anything
special on those boxes?
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

The ENG tool is the freeware ActiveX (IE) version.

The ziswin are showing the correct data (se attacment sendt).

The software on the HP DC7600 is the same as the other PC models, who are
working correct.
The sector 6 data are present from DTS until ZISWIN writes data (WS obj,
etc) into sector 6.

Roar Skaare


"Marcus Breiden" <zenworks@edu--magic.net> wrote in message
news:1o05kpo9ocjy9$.dlg@supportforums.novell.com...
> On Fri, 02 Dec 2005 16:49:46 GMT, Marcus Breiden wrote:
>
>> I know that in zdm 7 they changed the location of ZISD... it uses the old
>> sector and a new one..
>
> hmm... which version of the engl tools are you using? you can also use
> ziswin itself to show the ZISD...
>
> also we wonder if anything is blocking the sector 6 access... anything
> special on those boxes?
> --
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my
> e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

On Tue, 06 Dec 2005 19:32:48 GMT, Roar Skaare wrote:

> The software on the HP DC7600 is the same as the other PC models, who are
> working correct.
> The sector 6 data are present from DTS until ZISWIN writes data (WS obj,
> etc) into sector 6.

ok... could everybody with this problem (or similar) do me a favour and do
the following:

dd if=/dev/hda of=backup.file bs=512 count=63
that will generate backup.file (assuming it's hda we're reading)
hexdump -C can be used to take a look at it

I will need the backup.file... preferable directly uploaded to novell... so
contact me for further instructions..
--

If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv

Marcus Breiden

If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

--____DFIPXIZOYNRZGUSSPESI____ Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; modification-date="Fri, 6 Apr 2006 12:55:18 +0200" Seems like this is fixed in the beta-zdm7sp1. The pxe can now read the zis-data on the SATA-discs too. - Martin >>> Marcus Breiden 8. December 2005 09:01:13 >>> On Tue, 06 Dec 2005 19:32:48 GMT, Roar Skaare wrote: > The software on the HP DC7600 is the same as the other PC models, who = are=20 > working correct. > The sector 6 data are present from DTS until ZISWIN writes data (WS = obj,=20 > etc) into sector 6. ok... could everybody with this problem (or similar) do me a favour and do the following: dd if=3D/dev/hda of=3Dbackup.file bs=3D512 count=3D63 that will generate backup.file (assuming it's hda we're reading) hexdump -C can be used to take a look at it I will need the backup.file... preferable directly uploaded to novell... = so contact me for further instructions.. --=20 If you have already compiled drivers or have linux.2 please put them on http://forge.novell.com/modules/xfmod/project/?zfdimgdrv Marcus Breiden If you are asked to email me information please change -- to - in my = e-mail address. The content of this mail is my private and personal opinion. http://www.edu-magic.net --____DFIPXIZOYNRZGUSSPESI____ Content-Type: multipart/related; boundary="____BXWPIZCPYPSXUYMBMTMJ____" --____BXWPIZCPYPSXUYMBMTMJ____ Content-Type: text/html; charset=windows-1252 Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Text.htm"; modification-date="Fri, 6 Apr 2006 12:55:18 +0200"

Seems like this is fixed in the beta-zdm7sp1.

The pxe can now read the zis-data on the SATA-discs too.

 

- Martin

>>> Marcus Breiden<zenworks@edu--magic.net> 8. = December 2005 09:01:13 >>>
On Tue, 06 Dec 2005 19:32:48 GMT, = Roar Skaare wrote:

> The software on the HP DC7600 is the same = as the other PC models, who are
> working correct.
> The = sector 6 data are present from DTS until ZISWIN writes data (WS obj, =
> etc) into sector 6.

ok... could everybody with this = problem (or similar) do me a favour and do
the following:

dd = if=3D/dev/hda of=3Dbackup.file bs=3D512 count=3D63
that will generate = backup.file (assuming it's hda we're reading)
hexdump -C can be used to = take a look at it

I will need the backup.file... preferable = directly uploaded to novell... so
contact me for further instructions..<= BR>--

If you have already compiled drivers or have linux.2 please = put them on
http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
=
Marcus Breiden

If you are asked to email me information please = change -- to - in my e-mail
address.
The content of this mail is my = private and personal opinion.
http://www.edu-magic.net

= --____BXWPIZCPYPSXUYMBMTMJ____-- --____DFIPXIZOYNRZGUSSPESI____--

We are suffering from the same issue of PXE not reading the ZISD
information thus going into a PXE loop.

Does anyone know details of when ZDM SP1 is to be released? I saw May in a
posting somewhere but it's now coming to the end of May with no news yet.


Thanks for any help you can provide

Tim



> Seems like this is fixed in the beta-zdm7sp1.
> The pxe can now read the zis-data on the SATA-discs too.
>
> - Martin
>
> >>> Marcus Breiden<zenworks@edu--magic.net> 8. December 2005 09:01:13 >>>
> On Tue, 06 Dec 2005 19:32:48 GMT, Roar Skaare wrote:
>
> > The software on the HP DC7600 is the same as the other PC models, who =
> are=20
> > working correct.
> > The sector 6 data are present from DTS until ZISWIN writes data (WS =
> obj,=20
> > etc) into sector 6.
>
> ok... could everybody with this problem (or similar) do me a favour and
do
> the following:
>
> dd if=3D/dev/hda of=3Dbackup.file bs=3D512 count=3D63
> that will generate backup.file (assuming it's hda we're reading)
> hexdump -C can be used to take a look at it
>
> I will need the backup.file... preferable directly uploaded to novell...
=
> so
> contact me for further instructions..
> --=20
>
> If you have already compiled drivers or have linux.2 please put them on
> http://forge.novell.com/modules/xfmod/project/?zfdimgdrv
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my =
> e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net
>

Quigley@tiscali.co.uk,

SP1 won't be out until "summer", but the fix is in a hotpatch - do you
have a service contract with Novell?

--

Shaun Pond

Hi Shaun

We don't have a service contract with Novell. As suggested in many of the
posts, I did contact Novell to get the Hot Patch; they asked me for the
TID number, which I gave them (10100142), but they said there wasn't a Hot
Patch to fix this issue yet.

Is there another TID that covers this? Is there another code I can quote
specifically for this HP.

Admittedly, I did this about a month ago, so perhaps the patch is now
available.

Thanks for all your help

Tim

> Quigley@tiscali.co.uk,
>
> SP1 won't be out until "summer", but the fix is in a hotpatch - do you
> have a service contract with Novell?
>
> --
>
> Shaun Pond
>
>