Sessions & Logout page
Hi all, we have a problem with logout page and i try to explain it:
If we logon in NAM and we logout into session time, everything works
ok, but if we logon and we wait for session e | | 5 | 9 | 6/9/2009 7:46:02 AM |
NAM and Google Apps
Hi All,
I've been asked to set up the SAML SSO to Google Apps, and am trying to
sort it out on the NAM infrastructure we've got. We're currently 3.0 SP4
IR1.
So for it's | | 9 | 8 | 6/9/2009 4:15:06 AM |
Identity Server: "Unable to read keystore"
I get this error when looking at status from the Web Console:
The following error occurred during the identity server configuration
Unable to read keystore : /WEB-INF/certs/noSigningKeyst | | 5 | 13 | 6/8/2009 9:26:50 PM |
Identity server error: pending status (allways)
Hello
We need help, please
We've an identity server with break health, NAM version 3.1, no cluster
configuration.
We can`t aplly any command over the server, all of then have | | 4 | 6 | 6/8/2009 8:39:40 AM |
Change IDS Admin Password
Guys, after we changed the password of Admin from IDS. What others
things that we need to configure on both IDS and LAG in order to let it
run without problem after changing the password? | | 1 | 12 | 6/7/2009 4:12:43 AM |
Single logout from NAM AND protected resources
Scenario:
Three protected web resources behind NAM. All of them with login forms.
NAM SSO form fill policies has been created.
The logout functionality of each resource has been mod | | 19 | 13 | 6/7/2009 4:11:30 AM |
Unattended backup for administration console
Is there any way to perform unattend backup for NAM?
I just searched there is a script ambkup.sh to backup the admin
console. However it requires user input password. Is there anyway | | 9 | 8 | 6/7/2009 4:08:42 AM |
How to accelerate Microsoft Communicator 2007 R2 Web Access
Has anyone accelerated Microsoft Communicator 2007 R2 Web Access using
NAM 3.1?
Mark
--
beardmak
-------------------------------------------------------------- | | 3 | 8 | 6/7/2009 3:59:03 AM |
Integrating Access Manager with a Portal
I have been asked if it is possible to redirect a request for any web
service proxied by Access Manager, to a portal. The portal itself
contains links to all of the web services offered. | | 2 | 6 | 6/7/2009 3:56:54 AM |
Reverse Proxies can't resolved
Hi,
I've seeing a strange issues here where the AM3.04 IR2 can resolved
the proxy me.
If i'm using https://idtest.abc.doom.corp the pages could be
resolved.
but when i' | | 1 | 13 | 6/7/2009 3:45:19 AM |
Question about NAM documentation
Hello,
Here 'Novell Documentation'
(http://www.novell.com/documentation/novellaccessmanager31/installation/index.html?page=/documentation/novellaccessmanager31/installation/data/b457 | | 3 | 7 | 6/4/2009 5:46:01 PM |
Multiple Cookie Domains
Hi,
We have several websites (ddss.org etc) that do not fall under out
cookie domain (domain.com). In iChain, we have the option to specify the
cookie domain individually for each acc | | 1 | 11 | 6/4/2009 5:36:01 PM |
NTLM vs. Kerberos?
Can someone explain the diff. between NTLM and Kerberos auth?
I was under the impression that for Kerberos auth to work (currently),
the following had to be true:
a) You ha | | 2 | 10 | 6/4/2009 5:36:01 PM |
Role sharing in federation
Hi all,
I've configured two identity servers for federation using SAML2, one is
acting as IdP and the other as SP. Federation is working properly. After
that I've tried to configure r | | 13 | 9 | 6/3/2009 11:13:07 PM |
Protected Resource Error:Unable to authenticate.
Hi,
I have installed NAM 3.1 on SLES 10 SP2 and confgured the identity
server /admin console with Active directory. I tested the Identity
server configuration using the url for i | | 4 | 11 | 6/3/2009 2:26:01 PM |
Any Cisco CSS users out there?
Anyone using NAM with a Cisco CSS L7 switch/load balancer?
Running into some issues, but not sure if it's due to a L4 switch
(Novell says L4 switch, but the documentation implies L7 swit | | 21 | 14 | 6/2/2009 11:33:38 PM |
Install AM 3.0 on SLES 10?
When we originally set up Access Manager, we did it on SLES 9, and then
eventually upgraded to 10 when it was released and supported.
I'm trying to setup a new test system and instal | | 12 | 7 | 6/2/2009 11:03:09 PM |
The embedded service provider does not have a configured
I got the following error after I configure LAG.
The embedded service provider does not have a configured trusted
identity provider
I seach for this in the forums and I see | | 2 | 6 | 6/1/2009 12:41:18 PM |
SELL Nokia n series N95 8gb N800,3G Apple IPHONE iTOUCH,New
COMPANY NAME: Kuster-Schweiz Telekom AG
Registered No. 09326432
EMAIL :kusterschweiz@gmail.com
MSN:kusterschweiz@hotmail.com
Yahoo messanger : kusterschweiz@yahoo.com
web | | 1 | 11 | 5/30/2009 9:55:42 PM |
SSLVPN looses connection after a couple of seconds
Hi
After succesfull login to NAM sslvpn, I can ping about 10 times. Afterthem
it's not possible anymore (till I logout and login again).My routes to the
internal network gets dissap | | 4 | 10 | 5/29/2009 6:52:44 AM |
kerberos failure
I've setup Kerberos with NAM3.1 and it seems to be working to a point. I
try and authenticate to a website and get the following in the catalina.out.
From what I can see, the Kerberos a | | 3 | 14 | 5/28/2009 5:36:01 PM |
Access manager pricing
Where can I find this without having to call Novell, go to a partner, jump
through hoops etc?
| | 5 | 8 | 5/28/2009 3:56:02 PM |
How to use two Reverse Proxy Lists
Hi
We are still migrating from iChain to AM 3.1. In the iChain, we have
two master acceleratos with several childs.
These are working for users from Internet (Outside) and from I | | 3 | 10 | 5/28/2009 8:26:01 AM |
How to publis Applications that should run with sslvpn?
Hello NG
I configured Access Manager 3.1 with SSL VPN. Now i would like to publish
application on the SSLVPN Browser frontend. These applications should be
published only with sslvp | | 4 | 6 | 5/28/2009 8:16:01 AM |
Migrating iChain settings to AM 3.1
I hope you don't mind that I have another question for you regarding
some option(s) from iChain for the "Maximum idle time before requiring a
new login", "Forward iChain co | | 10 | 11 | 5/27/2009 10:29:39 PM |
Comparing iChain and AM 3.1
in iChain I have a master accelerator called "cstlwtr" IP address
205.225.241.37 "Forward host name set by browser to the web server",
there are 4 children attached to | | 4 | 13 | 5/27/2009 10:16:10 PM |
SSLVPN MTU issues
Just curious if anyone has seen MTU issues with NAM 3.1 SSLVPN?
We have a new ESP enabled SSLVPN that works fine when using UDP on port
443 in Enterprise Mode but when we use TCP we seem | | 4 | 12 | 5/27/2009 10:07:32 PM |
Can J2EE agent use SAML?
I've configured JBoss agent for direct access with Access Manager (no
access gateway). J2EE agent has embedded SP that uses Liberty protocol.
Can I somehow configure the agent (ESP) | | 1 | 13 | 5/26/2009 6:11:07 PM |
Post Login - Browser Back Button Query
Hey guys - hope everyone is well :)
have been setting up NAM enviro and all looks ok
silly query - once user logs on, auth to iDS and gets fwd to protected
resource, since it ends up | | 3 | 9 | 5/26/2009 10:44:37 AM |
PHP_AUTH_USER Problem
Hi
We are migrating from iChain to AM 3.1.
Our first protected Ressource is a PHP Page which act as a portal site
to access all the others Web Apps.
We use the PHP_AUTH_USER | | 1 | 9 | 5/25/2009 2:36:01 PM |
iChain terms compared to AM 3.1
In iChain there is a setting that I want to make sure that I understand
is the same in Access Manager, in iChain we have a proxy that uses
"Forward host name sent by Browser to the w | | 1 | 12 | 5/20/2009 11:03:17 PM |
Empty page after login
Hello all,
I'm using jboss agent to protect payroll test application (that comes
with agent).
When I try to access protected resources of payroll app, I'm redirected
to logi | | 4 | 10 | 5/20/2009 12:21:52 AM |
FormFill ( Username / password ) with Liberty or Card Space Authentication
Hi,
actually we do have enabled Liberty and CardSpace authentication on our
webside. It works.
The only thing which does not work is the form fill to a portal login
page | | 3 | 11 | 5/19/2009 1:36:01 PM |
Alternatives to NordicEdge - with Accessmanager
Hello,
We have Accessmanager 3.0 and want to implement an OTP
(OneTimePassword) Solution as add-on to the Accessmanager. The solution
of NordicEdge seems to fit very well - but it is | | 1 | 12 | 5/19/2009 11:50:07 AM |
SSL between the AG and Web Browser
We currently have iChain using an accelerator that has SSL between
iChain and the Web Server, it is using the wildcard certificate
(dfgwildcard) and I need to set up the same thing in AM. | | 9 | 11 | 5/18/2009 10:28:56 PM |
IP Addresses
As per a suggestion I am breaking up my original posting into more
manageable pieces. During my migration from iChain to NAM do I also need
to Migrate the IP addresses? I thought that NAM | | 10 | 13 | 5/17/2009 11:58:46 PM |
amrestore.sh won't work on localized platforms
Simply because the amrest-fn.sh called by amrestore.sh is doing a 'grep'
in a log file to find an error message ('total failed...'). This error
message coming from ICE is localized.
S | | 1 | 9 | 5/15/2009 5:35:12 PM |
SSLVPN webserver root location?
I was wondering if anyone knows the file-system location of the document
root for the SSLVPN web portal?
We are running NAM 3.1 IR2 ESP-enabled SSLVPN on a dedicated SLES 10 SP2,
wi | | 3 | 9 | 5/14/2009 11:10:45 PM |
Problem with LAG behind a load balancer
Hi,
I'm having problems with running a LAG behind a load balancer. The
load balancer is a barracuda 340. I've been through technical support
with barracuda and they say everyt | | 12 | 9 | 5/14/2009 6:16:01 PM |
Redirect back, what am I missing?
Hi please forgive me for my garbled explaination of problem I am having
on our LAG 3.0.4-56
The guys have requested a change, not a problem I said
We want a redirect for http://a | | 4 | 6 | 5/13/2009 11:30:38 PM |
Identity Stores for AM 3.1
Does AM 3.1 support Oracle Internet Directory server as the user
identity store?
--
----------------------------------------
-eDir4ever :)
------------------------- | | 1 | 14 | 5/13/2009 6:50:25 AM |
Invalid certificate for Reverse Proxy service on NAM3.0
I have installed NAM 3.0 SP4 IR2 for both Identity server and Lunix
Access Gateway. When I configure the HTTP Reverse Proxy service for SSL,
I got the invalid cert. error for the new crea | | 2 | 11 | 5/12/2009 9:34:24 PM |
500 Error - Script Arg Builder
Hi,
We have NAM 3.1 on Linux and I was developing a SNMP channel to create
notification filters. When creating the channel, under the Configuration
tab, when I click on the " | | 1 | 12 | 5/12/2009 7:21:39 PM |
Policies stay in pending state
Hi,
I have write 10 policies and after that, I receive always the message
:
"Auth_Policies_ACC" has changes pending.
Click Cancel Changes to discard chang | | 1 | 8 | 5/12/2009 7:21:38 PM |
SSO to WSS 3.0 ?
Anyone know where a doc exists for getting SSO into WSS 3.0?
There's a cool solutions/communities one, but from what I can tell,
it's more for MOSS vs. the free WSS 3.0
We h | | 21 | 5 | 5/12/2009 6:57:08 AM |
AM 3.1 IR2 - Liberty Identity Provider - change Image for Authentication no t possible
Hi,
Identity Server Configuration -> Liberty -> Trusted Providers -> "Your
Identity Provider" -> Authentication Card -> Choose different Image -> OK
| | 3 | 10 | 5/9/2009 9:09:34 AM |
Integrate with Portal
guys... need some guide...
if AM is too integrate with Portal... How we grant the AM Session
through Portal login? Is it by replacing with AM Login?
Another this is about the Portlet | | 1 | 10 | 5/8/2009 1:20:51 PM |
Uninstalling IdS
Is there any safe way to uninstall the IdS off a server that has both
the IdS and an Admin console installed on it? It seems from the docs
that the uninstall will remove ALL AM component | | 5 | 14 | 5/8/2009 1:00:25 PM |
Accelerating Blackboard
Hi All,
Is anyone successfully accelerating Blackboard with NAM (I'm using 3.0
SP4)?
It's running OK in iChain, and is 99% there in NAM but I have a
particular issue wit | | 11 | 12 | 5/7/2009 5:38:54 AM |
Checking password expiry in NAM 3
Does NAM has the feature of checking user password expiration when login
through NAM? Thus when user's passwordExpirationTime attribute is over
the period, then it will redirect user to t | | 4 | 12 | 5/6/2009 8:55:57 PM |