changing public IP addresses for Border 3.9
Have 2 servers running Netware 6.5 sp2, set up July 2007. Server one
has GroupWise 6.0. Server 2 has BorderManager 3.9. Changing ISPs, have
to change public IP addresses. Consultant n | | 3 | 15 | 7/6/2009 8:24:25 PM |
Add IPX
Dear All,
How to add IPX protocol on Windows Ce ?
I get information, This need 3rd party software, What software
recomended for this ?
Best Regrads
Listiyo
| | 5 | 17 | 4/8/2009 4:06:33 AM |
IPX Proxy
Hi,
we`ve got new routers (Layer-3 switches) which don`t supports "IPX/SPX".
Unfortunatly we have some DOS 6.22 clients which use IPX to connect to our
Netware 6.5 Server.< | | 2 | 24 | 3/1/2009 12:52:43 AM |
iptrace appear * * *
hello,
i don't know this forum give the correct answer, excusem for this.
I have NW6 2 nics private and public, every works fine, IP it's
configured
as router, Default Route | | 5 | 34 | 2/23/2009 3:46:01 AM |
Achat meridia canada Simple
Achat meridia canada Simple
meridia belgique commande en ligne
meridia belgique au rabais en ligne sans prescription
meridia bon marche Sans Prescription
commander meridia par mail | | 0 | 74 | 5/18/2008 11:17:24 PM |
MTU
Hi,
I've BM3.5 on NW5.1 and use vpn site to site.
My problem is that i need an MTU to 1500 but i don't know where i could
change the MTU.
thanks
--
popoto | | 2 | 78 | 3/17/2008 11:10:55 PM |
Two ISP connection and 4 NIC
I have two ISP connections for Internet and the BM server has four
interfaces, two public interfaces with completely different IP addresses
and two private interfaces.
I want to connect | | 6 | 56 | 9/30/2007 4:26:38 PM |
BM without the NW Client
Sorry, I originally posted this in the BMAS forum but I don't think anyone
is monitoring it so I moved it here...........................
Hello,
Could someone please point | | 2 | 73 | 8/30/2007 4:20:43 PM |
SLPDA assignments with DHCP using QIP
SLPDA assignment with DHCP inform packet from QIP does not allways work
on newer systems with wireless nics. Mostly tablets and new hp
laptops. Seems like duel nics (wire & WI-FI) c | | 1 | 55 | 12/12/2006 9:34:59 AM |
Secondary Default Gateway
Hi,
I have 2 communications servers in separate Trees both running Novell OES
and BorderManager 3.8. One of the servers has a DSL connection and the
other has a LAN connection. Wh | | 3 | 60 | 11/1/2006 3:15:10 AM |
502 bad gateway with DNS Host Name Resolution failed
I am running NW6.5SP5 with BM3.8 SP4 with BM38SP4_IR3. Since putting on
the updates, two seperate servers with separte internet connections, are
both giving me 502 Bad Gateway errors, with | | 5 | 66 | 5/11/2006 8:48:24 PM |
GateWay MX6619m
The owner make some partitions and formated her notebook and forgot to
save drivers. Now wants me to fix the mess with just a recovering cd
with those drivers missing (ethernet, vga, media, s | | 1 | 70 | 4/4/2006 8:48:38 PM |
Re-Directing URL
I have gone through some of the solutions, but I still am having a
problem. I would like to redirect urls to bogus urls. I have added them
to the hosts file of the bordermanager server, bu | | 7 | 76 | 3/17/2006 4:03:19 PM |
Socks-gateway
After update NW65-Sp1a to Sp4a and BM38-Sp3 to BM38Sp4
Socks stops working.
Also, with enabled Socks, internet access over the proxy server is no more
possible.
The Client (Browser) g | | 3 | 68 | 1/4/2006 1:41:52 PM |
Socks-gateway
After update NW65-Sp1a to Sp4a and BM38-Sp3 to BM38Sp4
Socks stops working.
Also, with enabled Socks, internet access over the proxy server is no more
possible.
The Client (Browser) g | | 0 | 68 | 12/30/2005 5:14:13 PM |
Mal-formed reply
Any reason our system would get this error when trying to access
http://www.aquinas.edu ?? Only happens for that particular site.
Status : 502 Bad Gateway
Description : Mal- | | 3 | 67 | 11/8/2005 8:30:54 PM |
Connect fileserver to proxyserver... Please help..
Hello,
i recently installed an antivirus on a novell 6 fileserver and now i want
to update the virus definitions, but i cant connect the fileserver to the
internet, i have a novell | | 1 | 54 | 10/31/2005 7:46:53 PM |
PLEASE HELP!!!!
i hava installed novell 6 with servicepack5 and i installed bordermanager
3.8. i have 3nic's and i want to split my internet connection over 2nic's.
the users are loggin in a seperate netwar | | 1 | 64 | 10/11/2005 3:49:00 PM |
SOCKS & proxy application rules
How i make to use socks thru proxy application rules?
Regards,
Gabriel JCNASSUR
+55 11 45215143
| | 1 | 64 | 9/20/2005 8:35:06 AM |
multiple interfaces and subnet routing
I am running BM 3.7 SP3 on Netware 6 SP5. I have a default route set to my
ISP. I have a static route set for a xxx.xxx.0.0 net with a 255.255.0.0
mask set to point out a frame relay router | | 1 | 66 | 8/10/2005 11:39:43 PM |
IPFLT
When IPFLT is loaded on my BM 3.8 server internall communication are
lost? There are any issues with the IPFLT.nlm?
| | 2 | 63 | 6/1/2005 5:38:43 PM |
502 Bad gateway
Hi All,
I experiencing some bad gateway messages on links to particular webpages.
It appears the parent page displays OK, but any link comes up with 502 BAD
GATEWAY.
I'm rela | | 1 | 70 | 5/31/2005 12:14:28 PM |
Mapping public IP address
Hi all,
Dont know if this is the right forum, but i have a little issue at hand.
I have configured an OES server for Netware 6.5, and have also BM3.8
configured on the server. Now I | | 1 | 80 | 5/25/2005 8:22:31 PM |
Monitoring IP Gateway Activity hangs workstation and rise Servers CPU utili zation 100%
Hi..
I have nw5.1 sp6 and BM 3.7 sp3 with last patches..installed with C.
Johnson's BM Book.
used services/proxies HTTP, FTP ,Generic TCP and Socks
Only one acces rule with indexe | | 3 | 58 | 5/20/2005 12:38:50 PM |
German T-Online Connection with Bordermanager
We have a SBS SUite 6.5 with Bordermanger 3.8
We need now Access to the "Classic Gate Software" from the German ISP t-
online with their Software over the Bordermanager.
We need | | 1 | 68 | 4/27/2005 9:34:35 PM |
IP/IP Gateway Hang
When I try to load the IP/IP Gateway on our NW6SP5/BM3.7SP3 server the
entire machine seems to hang. It has not abended but appears to be too busy
to respond to requests from anything inclu | | 1 | 69 | 4/19/2005 4:26:56 PM |
Can anyone explain ipx?
I'm not sure this is the correct forum, but here goes. I'm
trying to track down an ipx issue and have noticed that some
systems seem to respond to an ipx ping while others do not.
At wh | | 2 | 74 | 4/9/2005 8:55:12 PM |
Adding Static Routes for VLANS
We have 3 servers each in a different vlan and 1 server is a Bordermanager.
We added network routes to 2 server and all the vlans can see them, the
Bordermanager already has a default route t | | 4 | 57 | 4/5/2005 4:28:24 PM |
DHCP IP addresses bandwith limitations
The netowrk:
NW 6.5SP3
-BM 3.8
-eth0 public(registered IP address) - internet
-eth1 private(private IP address) - LAN
-eth1-not required at this scheme, but installed for | | 1 | 70 | 4/1/2005 3:10:24 PM |
VPN Authentication Gateway
Hello,
I just configured a client-site server & service on our NMB 3.8 server
but could not authenticate to the server via the VPN Client.Complains of
VPN Authentication Gateway not | | 1 | 70 | 3/24/2005 12:45:53 AM |
ACL Entries to allow port 443 to
Hi, just wondering if anyone else has had a problem with a BM 3.7 server
not allowing SSL connections. I have created an ACL rule allowing anyone
to connect to port 443 to specified detinatio | | 1 | 68 | 3/7/2005 5:50:29 AM |
change Public IP addresses
Hi all.
My q:
how to change Public IP addresses? it?s possible?
My BM is 3.8 SP 3
Two NIC, Public (Internet) and private (LAN).
Thank you for you requets.
Oscar Severino Lobos< | | 1 | 69 | 2/4/2005 4:01:33 AM |
BorderManager 3.8 and proxy performance
Dear all
i have several performance problem on BM 3.8 sp2a and last field patches.
The problem is: some very slow response on particular web sites. On
exactly same network | | 1 | 79 | 1/18/2005 3:16:34 PM |
Border Manager and Cisco ACS connection
The NIC in the Border Manager server failed.
I installed a new NIC and gave it the same IP address and mask as the old
one. The lights on the NIC's in both boxes are green but I cannot ping o | | 5 | 53 | 1/13/2005 8:13:40 AM |
end node
Hi there,
Maybe this is a very stupid question, and maybe I even post it in the wrong
group, but nevertheless there might be somebody out there with the answer:
When I boot my Netware | | 2 | 53 | 12/22/2004 11:05:58 PM |
2 ISPs, VPN an d Proxy
--____ITCUTQIADQRVSBMZMMOM____
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Is there a posibility to connect following structur:
1 | | 2 | 60 | 12/8/2004 3:54:51 PM |
BM 3.6EE VPN Ports
Hi, I have to move my BM VPN server behind a cable router. I need to
know what ports I have to forward to get the vpn clients to go through
the cable router. I searched the docs but could | | 5 | 52 | 11/22/2004 6:27:37 PM |
assigning routes to interfaces
The only place I found so far to assign routes to specific interfaces is
in tcpcon, which does not 'stick' after reboot. Is there a better
place/file/submenu to set these things at?
| | 1 | 63 | 10/12/2004 8:56:01 PM |
Novell Internet Access
Hi,
I?m new to Novell, I would like to know how terminals on a Novell LAN can
access the Internet. I?ve been Google'ing for a while searching terms
like "TCP/IP over IPX", | | 2 | 57 | 9/9/2004 8:28:17 PM |
Unable to configure FTP client
Unable to configure FTP client
I cant use FTP client on my network. Authentification fails. How can I
configure a clien like Filezilla to use FTP with BorderManager 3.6 ?
Note: | | 1 | 73 | 9/2/2004 2:10:33 PM |
TCP/IP ECB vs PCB
Hello!
Can anybody tell the difference between ECB(event Control Block) and PCB
in case of TCP/IP
You can tweak ECB by maximum/minimyum packet receive buffers
and PCB by pre | | 2 | 57 | 7/20/2004 7:37:42 PM |
Dual DNS domain lookups failed on BM37
Hi, I am having a problem with one of my Border Manager v3.7 (FP3) Servers,
Currently our Border manager (v3.7) servers have multi DNS zones specified
in the SYS:\ETC\RESOLV.CFG, current | | 2 | 66 | 7/20/2004 5:52:13 PM |
How can I use Balancing, if I connected to two ISP?
Hello,
I have NetWare6sp3 with 3 NIC's and connected to two ISP. I set two default
gateways (One to first ISP, Another to second ISP). But all of trafic goes
via first gateway. Can I | | 3 | 57 | 7/20/2004 2:13:50 AM |
Newbie to BM3.8
It's been a few years since I've last used NW so forgive me if I'm a little
dumb :-)
I have two servers:
1. NW6.5, internal IP, master
2. NW 6.5 w/ BM3.8, internal IP on NIC 1, ex | | 3 | 52 | 7/20/2004 1:54:21 AM |
BM 3.6 and RIP
I have a couple of questions about BM 3.6. I just started working with
this product and I am findgin a few weird problems with it.
1. Does RIP have to be turned on for the FW to work? | | 1 | 60 | 7/12/2004 8:48:55 PM |
Bm 3.8 SP2 recalled
I just got this brom Novell:
We found a serious abend issue with the ACLCHECK.NLM that was included
in the BM38SP2.EXE patch. As there were a number of customers reporting
that they had s | | 1 | 54 | 7/8/2004 10:15:31 AM |
Socks (IPIPXGW.nlm) don't load with error: GW_CANT_LOGIN
Good day.
I have installed box NW6.5 SP1a and BM 3.8.
When ipxipgw.nlm loads i see in the Logger Screen:
......
ERROR: GW_CANT_LOGIN
.....
ERROR: Login to NDS FAILED! | | 1 | 61 | 7/3/2004 5:28:46 AM |
500 Internal Server Error msg
We have had a new server up for @ 1 week, running Netware 6.5 w/ sp1.
Also running BM 3.8 and using the server as our DHCP server. It has been
running ok with all users having internet acc | | 3 | 48 | 6/27/2004 7:03:08 PM |
Interbase connection fail after BM authorization
Hi !
I've strange problem.
When I try to make connection to Interbase database and IP-gateway on Novell
Client is ON there is an database connection error.
When I turn off IP-gate | | 2 | 71 | 6/23/2004 12:01:43 AM |
MSN Messenger
Good Morning,
I have Border 3.8 Trial and my users work with MSN Messenger. After to
install Border, this software stopped to work. I don?t know how configure
Border to allow Messen | | 1 | 69 | 6/16/2004 5:13:12 AM |