Extend Raid5 Array
Hi All,
I need to add a new Hard Drive to my netware server but i'm unsure what
i need to do merge it to one of my existing drive.
Please help thanks....
< | | 0 | 16 | 11/7/2009 4:10:13 AM |
Server folders disappearing
Console displaying
Can't write \\dell\sys\SYSTEM\MKDE\LOG\xxxxxxxx.log
Check disk space
All directories on sys volume not all showing up even for Admin,
sometimes they | | 0 | 19 | 11/7/2009 4:10:08 AM |
Upgrade 4.11SP9 to 5.1 and no one can log in
Hi,
I'm at a loss. I had a functional 5.1 SP3 server DS8.77 master and a
functional 4.11SP9 server with RW replica. Goal was to remove IPX from
network (for wan transport | | 0 | 16 | 11/7/2009 4:10:05 AM |
IP Binding problem?
Hello I have a weird one that I can not figure out.
I am running two Novell 5.1 servers. When I VPN to my network and log
in via the Novell logon, I only map to one of my servers | | 0 | 14 | 11/7/2009 4:10:04 AM |
Migrating a 5.1 license w/o disks
To Whom It May Concern:
Due to a variety of reasons, I no longer have the original 5.1 license
disks. Is it possible to move the license from one 5.1 server to another
with | | 0 | 19 | 11/7/2009 4:09:50 AM |
Problems with NW 5.0 and NW50sp6a
I exploded sp6a to the sys vol of my server 5.0. When I try to install
'spack.ips' via nwconfig, I get the following error message: "No
installation file (*.ips or pinstall.nlm) c | | 0 | 9 | 11/7/2009 4:09:46 AM |
No Ping, nothing
Now that I have my beautiful new NW 5.1 server up and running, I cannot
log into it. I tried to ping out and in -- I get nothing.
Gotta start from the beginning of installation | | 0 | 17 | 11/7/2009 4:09:42 AM |
No Storage Driver Files (*.HAM or *.CDM)
Trying to install NW 5.1 server. HD is WD 500 GB SATA. NW install did
not recognize any drivers. I downloaded SP8e and put the drivers on a
CD. I then attempted to address the CD b | | 0 | 21 | 11/7/2009 4:09:31 AM |
NICI Patch for NW5.0?
I'm trying to do an across the wire migration of my last NW5 server
(NW50SP6A) to NW65SP8 on new hardware. I'm using the Novell Migration
Wizard.
My problem is, I get an er | | 0 | 10 | 11/7/2009 4:09:30 AM |
Making Novell login mandatory
I finally managed to achieve an automatic login into Windows after the
Novell client screen pops up. There are lots of helpful threads and TIDs
about it, but I used a wrong data type* | | 0 | 12 | 11/7/2009 4:09:28 AM |
NW 5.1 Minimum Patch List
Hi,
Can anyone point me to the minimum patch list for NW 5.1?
Thanks
Alan
--
ostrowlaw
---------------------------------------------- | | 0 | 7 | 11/7/2009 4:09:27 AM |
Question about adding extra hd space to a vol.
I am upgrading a file server with more harddrive space. I am going to
leave the current array the way it is. I am going to set up a new array
with the addtional (new) drives. My que | | 0 | 20 | 11/7/2009 4:09:24 AM |
Netware 5.1 Upgrade to VM
We have a Novell netware 5.1 physical machine.We are planning to move
the same netware 5.1 into VM,Suggestions please!!!!!
--
sarathy82
------------------------- | | 0 | 11 | 11/7/2009 4:09:23 AM |
Which version is Novell eDirectory Version 8.8 SP2 SMP-Novel
I'm looking to install Novell eDirectory Version 8.8 SP2 SMP-Novell
NetWare 5.70.07[DS] to emulate the configuration of a customers current
Novell environment.
What install | | 0 | 17 | 11/7/2009 4:09:21 AM |
Change context name
Hi.. I need to change the context name of a nw 5.1.
What steps should I follow and what precautions??
Can I change it with nwadmin just like that??
Many thanks.
| | 0 | 16 | 11/7/2009 4:09:12 AM |
Tree cannot be found
Hi,
I have been using a small NW5.0 server for some time now with few
problems (that you haven't helped me through). I have decided for
security reasons to switch some of t | | 0 | 13 | 11/7/2009 4:09:09 AM |
keep the drive mappings after logout
Dear Sirs,
is it possible to keep the drive mappings after logout so that a very
long copy process can work on copying files from a netware5.1 server to
a windows xp worksta | | 0 | 7 | 11/7/2009 4:09:07 AM |
Remove DS from server to reinstall to production tree
I have removed a crashed replica server from a tree that has 1 replica
now a master on a nw5.1 server. The only other netware server in the
tree is a nw6.5 server hosting GroupWise bu | | 0 | 16 | 11/7/2009 4:09:02 AM |
Netware 5.1 new install
We had a r/w replica server crash and we removed it from our tree. We
tried to build a new 5.1 server into our tree and the process hung at
installing NDS.
From a TID we came to | | 0 | 11 | 11/7/2009 4:08:55 AM |
DL380 G5
Morning Everyone,
Can anyone here tell me if I can install netware 5.1 on a new HP DL380
G5? It has dual quad core xeons. E5430's to be exact. I had read
something about ACP | | 0 | 14 | 11/7/2009 4:08:51 AM |
Netware VMs
Im looking for advice on setting up VMs for different Netware versions.
I have a Proliant G1 with 2 x Processors and 1G of RAM. Will this
hardware be suitable for VM?
| | 0 | 15 | 11/7/2009 4:08:50 AM |
Netware Emulate Windows
A while back (years ago) I remember seeing a Cool Solutions article that
discussed having a NetWare server emulate a Windows server.
Unfortunately, I cannot find the article.
| | 0 | 17 | 11/7/2009 4:08:46 AM |
symantec antivirus
I got this error code when trying to load Symantec Antivirus 9.0 on the
server , CC001000, Virus Definition File is not Valid. Then I tried
these steps below but still does not work. D | | 0 | 14 | 11/7/2009 4:08:44 AM |
Windows Vista
I recently obtained a Vista Business machine. I have a Novell server
with 5.1 on it. I loaded the vista client on the computer but I am still
unable to see the Tree and Context to conn | | 0 | 21 | 11/7/2009 4:08:42 AM |
Migrate Netware 5.1 to new hardware.
We have a production server that we wish ran a migration on using the
migration wizard 6.5 tool. Everything appeared to go as documented, but
what's "Select the Pre-Migration Serv | | 0 | 21 | 11/7/2009 4:08:38 AM |
SMS showing error under Currently Installed Products.
Hi Everybody,
We have a Netware 5.0 w\ spacks. Our Arcserve backup hasn't been running
well, it backs up but it doesn't use the SMS anymore.
So I went to Currently Installed Products an | | 0 | 11 | 11/7/2009 4:08:37 AM |
After unmirroring and unexpected restart no SYS
NW 5
I have two volumes SYS and DATA.
I have two hard drives mirrored.
About a month ago I looked at the console and had a unsynced mirror. I
then unmirr | | 0 | 8 | 11/7/2009 4:08:34 AM |
How to virtualize NetWare 5.0 (P2V)
Hi! I have an NW 5.0 server running a small oracle8-db and nothing else
on an old iron that I would like to get rid of. I would like to
virtualize the server on esx. The quickest way I | | 0 | 11 | 11/7/2009 4:08:32 AM |
conect to netware server
After I installed netware 5, I'm trying to connect using rconj and
rconip. when I entered ipaddress and password, it says conection
refused.
what password do I need to use?? I giv | | 0 | 14 | 11/7/2009 4:08:29 AM |
NW 5.0 upgrade install with orignial CD on SP6a
Hi,
I have some compressed corrupted system files. so I am planning to do
upgrade install with my original NW5.0 CD.
My server ist patched to SP6a, so my querstion is:
| | 0 | 8 | 11/7/2009 4:08:26 AM |
Netware 5.1 to 5.1 Migration Hardware upgrade
We have a production server that we ran a migration on using the
migration wizard 6.5 tool. Everything appeared to go as documented the
new server rebooted and took on the identity o | | 0 | 18 | 11/7/2009 4:08:19 AM |
Server reinitializes on SERVER.EXE
--____UJHXOKLIVZQOFGAKOQGI____
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
Content-Disposition: inline; modification-date="Tue, 15 Sep 2008 13:5 | | 0 | 17 | 11/7/2009 4:08:17 AM |
netware 5.1 support
I have a client running Netware 5.1 SP8. I see from the product life
cycle that this product is under self support only. Can anyone tell me
if self support means they are no longer p | | 0 | 14 | 11/7/2009 4:08:12 AM |
NSSMU not showing Pools and Volumes
We did drop in upgrade from 5.1 to 6.5 sp 7, we then needed to add more
drive space for one of our volumes on a raid 5, we put in the new drive used
HP's cpqonlin.nlm to expand the array.
| | 0 | 15 | 11/7/2009 4:08:10 AM |
Local Printer Fonts & Slow Copy
Hi,
NW 5.0 server has now been humming along for over 1 week (keeping my
fingers crossed). The problems I was reporting apparently were caused
by a defect hard disk. I put | | 0 | 23 | 11/7/2009 4:08:06 AM |
Download link for NW50 OS CD
Hi, Does anyone know of a download link for at least the OS CD or the OS
& Products CD for NW50? I am trying to help someone out that lost their
CDs but has their licenses and nee | | 0 | 22 | 11/7/2009 4:08:02 AM |
NW 5.0 Doesn't Recognize Entire Hard Disk
I lost my NW 5.0 server this morning and I am recreating it. I
installed a new hard drive, a 320 GIG EIDE drive.
I've been at this for 12 hours now and I'm REALLY FRUSTRATED!
| | 0 | 14 | 11/7/2009 4:07:59 AM |
Load command fails on new version
Hello all,
I am trying to replace a NW 6.0 server with a new NW 6.5SP7 system.
We are running an old accounting package on this server that uses a
Progress DB loaded via .n | | 0 | 14 | 11/7/2009 4:07:57 AM |
Nw5.1 upgrade ??
Hello,
I have an Nw6sp5 server that I'm no longer going to use, I would like
to migrate my Nw5.1 server to that box. Both servers are in the same
NDS tree just under differe | | 0 | 14 | 11/7/2009 4:07:50 AM |
Timesync error 8904
I can ping.nlm my time sources with no problems, however timesync
reports 'Unable to open connection to server (see source list below)
error 8904'. I'm very much a novice, any help wou | | 0 | 15 | 11/7/2009 4:07:49 AM |
How to convert NW5 to VMware ?
Hello experts,
I have one netware 5 which running on Compaq Proliant 800 server.
Because I want convert to VMware in the future.
Then I use Ghost 8.3 Clone the server to gh | | 0 | 11 | 11/7/2009 4:07:46 AM |
Planning NW51SP8 to NW65SP7 upgrade
Hi,
I'm planning an upgrade for my Netware 5.1SP8 network (all servers on eDir
8.7.3) to Netware 6.5SP7.
Never did such an upgrade before, so I'd like to be prepared as good as
| | 0 | 14 | 11/7/2009 4:07:44 AM |
binding gateway to nic
We had a 10/100 nic and replaced it with a 10/100/1000. In the old NIC
I used the format BIND BLAH BLAH address=x.x.x.x mask= x.x.x.x
gateway=x.x.x.x.
No matter what we can | | 0 | 11 | 11/7/2009 4:07:38 AM |
HP ML 150 G5 Server hangs on VGA Installation portion
i am installing novell 5.1sp8 on hP ML 150 G5
Server ,its hangs on VGA installing portion
& display massage X-Server --Graphical Console & not Shown any other
options
| | 0 | 14 | 11/7/2009 4:07:37 AM |
Unable to apply service pack
Trying to install nw51sp8 via nwconfig. When I enter the path
"sys:\nw51sp8\spack.ips" I keep getting the message "no installation
file.... found at path". Have tried | | 0 | 11 | 11/7/2009 4:07:34 AM |
NetWare 5.1 Server support for NFS
I'm looking for a way to seemlessly share files between my Windows XP
clients running Novell Netware 4.91 client, Windows 2003 Server running
Citrix and a Novell Netware 5.1 SP7 server wit | | 0 | 15 | 11/7/2009 4:07:31 AM |
failed migration
help! It botched when I was trying to install new products.
Now the new one is dead.
How do I restore the source server?
--
jilljrm
-------------------------------- | | 1 | 43 | 4/26/2008 6:11:48 PM |
SQLC.NCF ?
I'm trying to determine the need for SQLC.NCF.
I installed the Netware Enterprise Server and
Netware Web Manager to support GroupWise
WebAccess. ['not sure if they were both needed, | | 6 | 39 | 4/26/2008 9:48:27 AM |
new install of netware 5...
hi, I'm new to the forums and to novell also....but here goes my
question, I have just installed or think I installed netware 5 in
vmware to test it out, but after the install, I restart | | 4 | 40 | 4/10/2008 8:04:12 AM |
Only two users can connect after SP8 Overlay iso
We have a 25 user license of Netware 5.1 Small Business Server which I
had been trying to load on new hardware without success.
On reading the forums, I was steered towards downloadi | | 5 | 40 | 4/8/2008 4:14:35 PM |