nsslookup works, ping doesn't
Hello together,
i have a strange problem. My Netware Server is able to resolve a
Systemanme via nslookup, but if I try to ping to the Systename I receive
an error: Could not | | 0 | 21 | 11/7/2009 3:33:57 AM |
NAMED.NLM -s gives warning
--____CQNRLPNBOQQKJSFMCDGP____
Content-Type: text/plain; charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; modification-date="Tue, | | 0 | 14 | 11/7/2009 3:33:55 AM |
Delete old DNS Entries
Hello all,
is it possible to delte old DNS entries from Netware DNS Server
automaticly?
We've got a DNS Cluster Netware 6.5 SP8 and it's configured that our
workstation creat | | 0 | 23 | 11/7/2009 3:33:53 AM |
DNS server issue hangs entire site
There are two linked sites, in separate cities, both run Netware 6.5SP7
on all servers. Each site has a primary file/print server, a Groupwise
server that also is the DNS & DHCP serve | | 0 | 16 | 11/7/2009 3:33:52 AM |
DHCP IP Assignments Report
Is it possible to run a report that would show me what machine each IP
has been assigned to for my entire DHCP database?
Thanks in advance
--
rodriguezh
| | 0 | 16 | 11/7/2009 3:33:46 AM |
Lease time
--____HAHEEZFZKYOVSEAXOFIP____
Content-Type: text/plain; charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; modification-date="Thu, | | 0 | 16 | 11/7/2009 3:33:44 AM |
DNS not updating new setting
I recently had to put filters for our dhcp scopes to allow them to do
recursive queries while not allowing anyone else to, a lot of the
machines wont take the new dns ip address, ie, m | | 0 | 20 | 11/7/2009 3:33:38 AM |
How configure DHCP for assign one IP to two MAC (LAN, WIFI) of same PC ?
Hello
I have novell Netware 6.5 SP7 and I want configure DHCP server for
assign the same IP to two MAC of the one PC for LAN and WIFI, is it
possible ? If yes, How I do it ?
| | 0 | 12 | 11/7/2009 3:33:29 AM |
DNS entry not resolved on primary host
Hi,
We have an issue with 1 dns record that isn't resolved on the primary
dns server but only on the secondary dns server.
Both are using the same domain information.
| | 0 | 18 | 11/7/2009 3:33:28 AM |
NIC Load Balancing & Failover brings DHCP issues
Here's an odd one... Perhaps I'm just not remembering correctly how I
used to set this up.
Server is NW 6.5 SP7, not clustered. It has two NICs. IP & IPX are both
on the | | 0 | 13 | 11/7/2009 3:33:22 AM |
Turning off Recursive queries
Not very proficient in DNS so grateful for any input you can give ..
I have to turn off recursive queries on our DNS but when I do names
cannot be resolved. Our Primary and Seco | | 0 | 19 | 11/7/2009 3:33:17 AM |
bind dhcp to nic possible
Hi all: We have a Border Manager server with a third NIC
which supports several machines on a VLAN. We often have
visitors who need simple internet access. So rather than
setting up | | 0 | 15 | 11/7/2009 3:33:16 AM |
No automatic DNS Entry
Hello,
we use DNS/DHCP Managment-Console Vers. 6.0. In the register DHCP-Service
there is a dynamic ( ..101.0 - ..101.255) and a static address range. If a
dynamic IP address i | | 0 | 14 | 11/7/2009 3:33:16 AM |
DHCP not updating DNS
--____SLVFKDESAIKUWONVMCFA____
Content-Type: text/plain; charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; modification-date="Fri, | | 0 | 15 | 11/7/2009 3:33:14 AM |
server name for DNS servers
Running DNS for internal addresses on two NetWare 6.5 sp7 servers.
External addresses are handled by our ISPs DNS. Typing nslookup on a
Windows XP PC returns the following.
C:\&g | | 0 | 29 | 11/7/2009 3:33:13 AM |
Auto-reload DHCP on error?
I have a server at a remote site that runs DHCP services for that site.
We have had so much trouble with their WAN link (microwave relay) in the
past that we keep DHCP on their local s | | 0 | 18 | 11/7/2009 3:33:13 AM |
Static ip dosent work, continue dinamyc ip assigned
I have a subnet 192.168.9.10-192.168.9.99, and its BootP and DHCP
dynamics. I have a pc that has an dynamic ip assigned by server dhcp.
But when I want assign manual IP to this pc (bef | | 0 | 14 | 11/7/2009 3:33:10 AM |
No IP assignment - but no errors
We saw a gradual degradation of DHCP services lately. Several machines
(XP) wouldn't get an address unless they renewed / released repeatedly.
Overnight, DHCP came to a h | | 0 | 9 | 11/7/2009 3:33:08 AM |
Strange console message
I have recently been getting a strange console message "cannot update nds
against an entry within subnet container: phs subnet.phs.high.ccps". I have
this happening on two out of | | 0 | 16 | 11/7/2009 3:33:00 AM |
Reverse DNS Help
Hi. I'm having trouble getting reverse DNS working on NW 6.5 SP 8. I
have a class B network 10.101.x.x. I've created a IN-ADDR.ARPA zone
10.101 (101.10.IN-ADDR.ARPA) and a Resource | | 0 | 11 | 11/7/2009 3:32:55 AM |
dns failover to secondary dns server
--____GWHFDEEECZAAULLYWYMO____
Content-Type: text/plain; charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; modification-date="Thu, | | 0 | 13 | 11/7/2009 3:32:52 AM |
Need help configure dhcpsrvr to load at boot
Hi all,
I'm am a Novell noob so please bare with me.
I have a Netware 5.70.06 server with dhcpsrvr. Dhcpsrvr does not load
automatically at boot and I need for it to. | | 0 | 15 | 11/7/2009 3:32:47 AM |
netware 6.5 obtain DHCP address?
Hi
New to netware and novell�s products.
I am used to Windows, so excuse my questions... but I�d like to setup
my netware 6.5 server to obtain a DHCP address from a Wi | | 0 | 17 | 11/7/2009 3:32:46 AM |
Change end address for existing subnet address range
Of course I can create another range & assign it to the server, but is there
a way to just change the end address of the existing range?
NW 6.5.8
Thanks
Seb | | 0 | 22 | 11/7/2009 3:32:41 AM |
hardware key mismatch
When I try to load dhcpsrvr, I get the error below. What could be the
cause. Nw6.5sp8
DHCP Server 3.0 Debug Log start time :8-10-2009 1:16:49 pm
0 : Logged in as Server
| | 0 | 17 | 11/7/2009 3:32:40 AM |
IP lease expires on Wednesday December 31, 1969
I have a Novell Netware 6.5 sp6 running dhcpsrvr.nlm 3.14. All of a sudden
most of the permanent ip addresses are now set to expire on Wednesday
December 31, 1969. I think this is ca | | 0 | 13 | 11/7/2009 3:32:38 AM |
Netware affected by new BIND DoS Vulnerability?
https://www.isc.org/node/474
Is Netware affected?
| | 0 | 18 | 11/7/2009 3:32:36 AM |
setting up a second DNS server - type?
I have two offices a couple of hours apart. I am running DNS at the
main office only on one server (NetWare 6.5 sp7). It handles internal
addresses only, it forwards requests for external | | 0 | 22 | 11/7/2009 3:32:34 AM |
moving DNS and DHCP to a different server
My Netware 6.5 sp7 server running DNS and DHCP had a hardware failure
this morning. It is up and running now. But I was wondering what
steps are involved in moving the services temporarily | | 0 | 22 | 11/7/2009 3:32:29 AM |
SLES DNS and NetWare DHCP
We have had DHCP running on NetWare for some time, with no local DNS
service. The DHCP option 6 is set to a BorderManager DNS proxy.
I just set up a SLES 11 server with named, and | | 0 | 17 | 11/7/2009 3:32:28 AM |
NetWare 6.5 SP7 / SP8 DNS resolver problems
all,
I'm now using for years same configuration with a couple of NetWare
installations. These are some small networks where I see no great benefit in
activating a local nameserver, so | | 0 | 19 | 11/7/2009 3:32:28 AM |
DNSMAINT -641 errors?
Hey folks, has anyone seen the -641 error when your run the DNSMAINT
utility?
I'm running NetWare 6.5sp7 and eDir 8.8.3 (NDS 202016.62) where I'm
trying to use the utility and as | | 0 | 18 | 11/7/2009 3:32:27 AM |
mass create dhcp scopes
i am moving into a new school
i plan to vlan down to each classroom
the school will be 10.60/16 with class rooms being 10.60.x/24 where x
will be a room number so if i see ip 10.6 | | 0 | 12 | 11/7/2009 3:32:23 AM |
iMan breaks DHCP Console
If I modify a DHCP subnet via iManager, I can no longer manage it in the
DNS/DHCP Console application. It just sits there and the red bar goes
back and forth at the bottom.
| | 0 | 15 | 11/7/2009 3:32:22 AM |
DHCP
Not sure how to word this, so please bear with me.
Can I set up a DHCP scope so that only those workstations specified via
MAC address will get the DHCP options, and the rest be | | 0 | 11 | 11/7/2009 3:32:16 AM |
How to set up DHCP for PXE-boot?
Hi!
We are trying to get Fog working (Fog: Free computer cloning system)
To get it to work we need PXE-boot from this Fog-server.
As DHCP-server we have it running on a Netw | | 0 | 17 | 11/7/2009 3:32:11 AM |
Need to recreate DNS / DHCP from Scratch
We have an environment with 2 NetWare 6.5 servers and one OES2 server
I do not have all the information on changes as I was brought in post
changes. I do know that DNS and LDAP were b | | 0 | 22 | 11/7/2009 3:32:03 AM |
Getting "229 messages dropped due to DHCP Server Agent log buf overflo w" when loading DHCP on console
I am getting this message when loading DHCP on my server. (NW6.5/SP7
8.8SP2) DHCPSRVR.NLM 3.14. Does not seem to be an issue, however should
I be looking for a problem somewhere?
| | 0 | 9 | 11/7/2009 3:31:55 AM |
Can not ping names across WAN segments
Problem wiht pinging/or achieving name resolution across WAN segements.
I can within each LAN segment.
I support a school district with 40 different DNS zones(long story,
| | 0 | 18 | 11/7/2009 3:31:53 AM |
Console1 1.3h
I am using DNS / DHCP on all of my locations. NW65sp8. It works fine but I
think I am missing a console one plugin. Maybe not. I use the DNS/ DHCP
client to configure everything. But when | | 0 | 14 | 11/7/2009 3:31:49 AM |
Securing DNS.
Can anyone tell me what's the best way to lock down DNS so that it
doesn't send out root hints ?
Just moved our DNS and now it's responding to such queries.
Is this so | | 0 | 9 | 11/7/2009 3:31:47 AM |
Any way to automatically get rid of bogus DHCP entries?
We have 2 clustered Netware 6.5 sp7 servers running DNS and DHCP. The
addresses are set to release every 4 days.
However when I'm in rconsole I get a ton of:
Recieved an | | 0 | 14 | 11/7/2009 3:31:46 AM |
DNSDHCP Locator object confusion, NW/OES2sp1Linux
Ok.. So I'm trying to figure out this mess with Novell DNS and about the
time I think I'm starting to understand it, I read another one of you
guys' posts (Marcel, Craig, Massimo, etc) | | 0 | 22 | 11/7/2009 3:31:44 AM |
Trying to start a second DNS server
I have an existing Netware 6.5 SP8 DNS server running on our main
server. I have another Netware 6.5 server that I would like to run as a
second instance that can resolve when the othe | | 0 | 15 | 11/7/2009 3:31:34 AM |
how do I know who or what generates the query-dns?
I don't know if it's the correct forum.....
I have noticed by my firewall that I have a lot of traffic that is a
query of DNS generate from my server novell.
I 'd like to | | 0 | 12 | 11/7/2009 3:31:33 AM |
Dns/hints: warning: Loading Root data from directory Failed
My new DNS cluster is not responding when i'm trying resolv names. In
the named.run the following error shows:
Dns/hints: warning: Loading Root data from directory Failed
< | | 0 | 15 | 11/7/2009 3:31:31 AM |
getting error on scope setting
Hello Everyone,
I am configuring DHCP on Netware server (6.5 sp7) by using iManager
when I am trying to configure scope setting I am getting error "Invalid
scope settin | | 0 | 15 | 11/7/2009 3:31:29 AM |
Subnet issues
Running dhcp service on my netware servers (nw6sp5), main server
location as well as remote sites.
DNS service is only running on each node of my 2 node cluster. All
seems to be | | 0 | 13 | 11/7/2009 3:31:09 AM |
Assigning IPs Using the MAC Address
--____NOMJCPOIGGKYIFFVHCTV____
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
Content-Disposition: inline; modification-date="Wed, 19 May 2009 10:0 | | 0 | 14 | 11/7/2009 3:31:05 AM |
NetWare router
I'm very new to DNS/DHCP and NetWare. I need to set up a NetWare box as
a router/gateway. The server has 2 NICs installed and NetWare 5.1. One
NIC is connected to the router, with an I | | 0 | 24 | 11/7/2009 3:31:00 AM |