All that great netware ip stack gone?
I remember hearing from novel salesmen and reps and other devs on reston
about how poorly NDIS was compared to the Netware protocol stack back in
the 1990s. Does switching to linux mea | | 0 | 5 | 11/7/2009 2:38:34 AM |
Vista showing wrong volume sizes
Weird thing occurring on all of our vista machines at one site in the
past two weeks. On the VISTA machines only, SP1, running Novell Client
2, they are showing all drive mappings to o | | 0 | 6 | 11/7/2009 2:38:29 AM |
oes2 dhcp question
Hi,
we have running 2 oes dhcp servers in the same subnet serving different
address ranges for different subnets for month without errors. Now we
use ZENWORKS with PXE boot. Since | | 0 | 5 | 11/7/2009 2:38:29 AM |
DNS Zones not updating from eDirectory
Hi guys,
We have a 3 server setup
first server is the master replica for the tree and CA
second and third server have dhcp/dns installed and also have
read/write replic | | 0 | 3 | 11/7/2009 2:38:25 AM |
OES2 as VPN server
Hello,
Is it possible to configure OES2 Linux as a VPN server, with VPN
clients or as SSL VPN server? e.g. with OpenVPN?
--
Kind regards,
Arjan
| | 0 | 4 | 11/7/2009 2:38:21 AM |
dhcp logging doesn't work?
Is there a reason why Novell DHCP doesn't write to the log files?
For some reason it's not starting and I cannot figure out why.
If I reboot the server, it doesn't load, if | | 0 | 2 | 11/7/2009 2:38:16 AM |
Client connections are not being cleared
Hello,
Users that connect on OES 2 Linux servers (eDir 8.8 sp5) have trouble
to cleare connections when workstation hangs.
To make these users to reconnect successfully we m | | 0 | 7 | 11/7/2009 2:38:16 AM |
Trying to install Wireless card - Heart Broken
I tried first using ndiswrapper then with a Native Driver from
sourceforge.net. Can't seem to get past square one.
Fresh install of SuSE 11. I'm not expecting much but if you wou | | 0 | 3 | 11/7/2009 2:38:14 AM |
resolv.conf - Only root can see
SLES 9 SP3 OES Servers. I noticed some third party apps that use a
local Linux user were not being able to resolve host names.
I noticed that on some servers, the /etcresolv.con | | 0 | 5 | 11/7/2009 2:38:13 AM |
OES and networkAddress attribute issue
We're starting to test our web filter appliance (iPrism) using LDAP
authentication so that our users do not need to do a second web login to
surf the web.
From what I can ga | | 0 | 4 | 11/7/2009 2:38:12 AM |
Error when add user to samba user
hi,
Get following error when add user into Samba user, already configure
LUM for this user, any Idea? can't find any related information in
novell web sit.
Error: Samba | | 0 | 8 | 11/7/2009 2:38:08 AM |
OES 2 NDS in zombie state
I have OES2 Linux server running Edir 8.8 sp2. I am having issues with
NDS on this server. NDS seems to become unresponsive.
When users try to login there login script will not | | 0 | 6 | 11/7/2009 2:38:05 AM |
dhcpd stops/hangs after between 45-60 minutes
I am having a problem with one of my remote site DNS/DHCP servers. The
issue I am having is that as of last week DHCP stops working after 45-60
minutes most of the time. This server | | 0 | 8 | 11/7/2009 2:37:57 AM |
OS/2 and OES2Lx
Hi,
has anyone a idea how to connect (for file access) OS/2 (do you remember ...
20 years ago? :-) to a OES2SP1Lx Server?
-There is no NCP-Client (the old one needs IPX, whi | | 0 | 5 | 11/7/2009 2:37:55 AM |
Anyone using regular DNS with OES2 Linux?
Anyone out there using the native SLES DNS with OES2 SP1 Linux, as
opposed to the Novell DNS? (the edir integrated one)?
Any caveats to doing things that way (like it interferes | | 0 | 5 | 11/7/2009 2:37:54 AM |
DNS: named.conf includes inop?
Hi.
I'm trying to add some additional logging settings to novell-named. I'm
following the directions outlined in
/usr/share/doc/packages/bind/README.SUSE, but for some reaso | | 0 | 7 | 11/7/2009 2:37:51 AM |
AFP Support for Mac OS X 10.6 in OES2 SP1
--____IWRAAWCJXGITFHHTSPQS____
Content-Type: text/plain; charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; modification-date="Fri, | | 0 | 4 | 11/7/2009 2:37:51 AM |
Open SLP can act as both DA & SA role??
As you know Open SLP on OES2 Linux server can act as DA as long as
configured "net.slp.isDA = true" in slp.conf or act as SA when
configured "net.slp.DAAddresses = xxx.x | | 0 | 5 | 11/7/2009 2:37:47 AM |
IP Address for SLES10 and OES2
Am installing a new server with SLES10 and OES2 (Latest version of
both). The SLES install asked for and received an IP address for the
Linux part. Now the OES install (eDirectory co | | 0 | 8 | 11/7/2009 2:37:46 AM |
Bind Entry for iManager
Hello,
Is there any entry I can add to bind for iManager. I.e., resolving
"imanager" to https://xx.xx.xx.xx/nps/servlet/portal?render=on?
Thanks.
| | 0 | 7 | 11/7/2009 2:37:42 AM |
slp service time setting
We have installed OES2 Linux with SLP services running on it and some NW
6.5 SP7 servers point to this DA server.
We find that no service registred on OES2 linx server while ente | | 0 | 5 | 11/7/2009 2:37:41 AM |
Reconfigure DHCP Locator/Admin Scopes
Over the summer we migrated all our NW 6.5 servers to OES2 Sp1 linux.
When I migrated DHCP services I did the 'server migration' option on all
of them. They all migrated fine and no | | 0 | 3 | 11/7/2009 2:37:37 AM |
NCP connexion
Hello,
I use ncpmount to create a remote connexion. When i use ncpumount
command, unmount works.
So i see my NCP connexion in "Remote manager".I can see all | | 0 | 5 | 11/7/2009 2:37:36 AM |
OES2 ndsd not talking to SLP
I have a tree with 20 some odd OES1 sp2 linux servers. This year we
introduced three OES2 sp1 servers. Those three servers have an
identical slp.conf file to my OES1 servers, but my | | 0 | 2 | 11/7/2009 2:37:35 AM |
VERY slow comm on gigabit from NSS vol
Hi,
I have NOES2 SP1 with last updates. My server has intel e1000 NICs
connected to 3com baseline 2126 G switch (24x100Mb 2xgigabit ports).
When I connect server to gi | | 0 | 8 | 11/7/2009 2:37:30 AM |
DHCP - Running out of leases
Over the summer we migrated from Netware 6.5 SP7 to OES2 SP1 on Linux.
Ever since then, we run into problems where the dhcp pool for a few
subnets run out of addresses. We havent add | | 0 | 1 | 11/6/2009 8:10:00 PM |
DNS server on multiple IP addresses
We're setting up a temporary DNS server running on OES2 SP1 Linux, and
we need it to respond on all configured IP addresses.
The server is configured with two different IP addres | | 0 | 5 | 11/6/2009 8:09:56 PM |
OES2 SP1 - Workstations loose mapped drive
Hello ,
on an OES2 Sp1 (plus latest patches) cluster, everythings works fine
but very often on workstations, browsing the resources, mapped drives
appear disconnected.
If you | | 0 | 7 | 11/6/2009 8:09:55 PM |
OES 2 SP 1 - Workstations don't see tree
I recently replaced a NW5.6 server with an OES 2 SP1 server on one of my
LANs. All workstations are XP, with the latest version of the Netware
Client. The server is doing DHCP and DDNS | | 0 | 7 | 11/6/2009 8:09:44 PM |
IPv6 support
Hi,
Is there a page that shows which parts of OES support IPv6, or where
it is work in progress?
For instance, will there be a DHCP server that supports IPv6?
Wh | | 0 | 4 | 11/6/2009 8:09:43 PM |
pure-ftpd does not work anymore
Hello,
I have a server with this configuration :
OES 2 SP1
Kernel 2.6.16.60-0.27-default
pure-ftpd-1.0.20-24.13
novell-lum-2.2.0.16-0.21
The ftp | | 0 | 7 | 11/6/2009 8:09:39 PM |
ncpmount shows empty directories
Hi there,
I have both an oes10sp2 box and a netware6.5 box
I also have a debian box (etch) that I rsync backups from the oes and
6.5 servers.
The ncpmount (from the debian et | | 0 | 7 | 11/6/2009 8:09:30 PM |
how to setup DNS subdomain?
I have two domains, my main organizational domain (example.com) that
uses
an OES2SP1 novell-named nameserver, and a subdomain that uses Active
Directory and has its | | 0 | 3 | 11/6/2009 8:09:27 PM |
Disable ncp, only allow cifs
Is there a way to disable ncp on an interface and only allow cifs. I want
to have two different ips with one providing cifs services and the other
ncp.
Thanks.
matt. | | 0 | 3 | 11/6/2009 8:09:25 PM |
OpenSLP stops seeing itself as a DA?
This is odd.
OES2 SP1 server (fully patched)
It's setup as a DA (itself), so it points to itself (not on the
loopback IP, but on the "regular" IP).
| | 0 | 3 | 11/6/2009 8:09:22 PM |
dhcp vlans
oes on sles running on vm.. have setup sles with multiple vlans... dhcp
working on the physical network card connected to vlan1... trying to get
dhcp to work for other vlans that are s | | 0 | 6 | 11/6/2009 8:09:07 PM |
OES Linux DHCP Locator object CX (Collisions with Netware CX?)
Hello,
I am performing the first install of Novell DHCP for OES Linux (we have used
ISC dhcp in the past), I am not sure about the locator object placment.
We currently have a co | | 0 | 6 | 11/6/2009 8:09:05 PM |
update DHCP entries on DNS server
Hi,
I have one subnet (no pool, no class, no zone)
on a DHCP server (OES2SP1-fully patched for
rcnovell-dhcpd).
If I define an entry for a PC on that DHCP server,
| | 0 | 6 | 11/6/2009 8:09:03 PM |
Adding Resource Records
[OES2 SP1]
I just created some address records with iManager 2.7.3 and I querying
these names did not give any result until ... I restartet rcnovell-
named...! Could that possibl | | 0 | 6 | 11/6/2009 8:08:52 PM |
runlevel start order
Hello NG
On our Sles10 OES2 i need to change the runorder of differend daemons. In
runlevel edit I didn't find where to change this. Where can i set the run
order or change the | | 0 | 3 | 11/6/2009 8:08:46 PM |
Novell Samba ceased working
Hi *,
last weekend I applied all suggested Novell patches to one of our OES1
Linux servers. Since then the authentication via edir in samba does not
work any more - "p | | 0 | 6 | 11/6/2009 8:08:43 PM |
DHCP Hosts not visible
Hello NG
On Sles10 SP2 with OES2 SP1 i configured a DHCP Server
The server is running well and the workstation are receiving also the DHCP
informations.
Unfortun | | 0 | 7 | 11/6/2009 8:08:43 PM |
Move DNS/DHCP from dead NW6.5 to OES 2 server?
Is there a clean way to move my DNS and DHCP from a dead NW 6.5 SP6
server to a new OES2 SP1 server in the same context? I have not yet
cleaned out any of the eDir objects related to t | | 0 | 5 | 11/6/2009 8:08:40 PM |
DHCP Console?
Good afternoon,
Is there a DNS/DHCP Management Console for OES2? The old management
console for NetWare doesn't seem to work anymore - the DHCP table is
blank when I open it | | 0 | 9 | 11/6/2009 8:08:34 PM |
DHCP on OES 2 Linux
I recently migrated the DHCP service from Netware to Linux. However, we
could never get it to stop ignoring the leases file and result in
handing out duplicate addresses. We then jus | | 0 | 6 | 11/6/2009 8:08:32 PM |
SLPD announces wrong interface
I'm having an issue with one of my SLES 10 SP1 SLP DA servers. After
adding an additional NIC to the server, SLPD anounces the incorrect
interface for the directory-agent service. I | | 0 | 3 | 11/6/2009 8:08:30 PM |
Samba and users
Hello,
I need to configure Samba for on a SLES 10SP2 (ZCM) server. The goal is
to have access to a share where resides the images. I have to put on the
share existing images fro | | 0 | 5 | 11/6/2009 8:08:19 PM |
Migrate DNS(netware) to OES2sp1(linux)
Hi,
I have to migrate DNS service from NW6.4sp7 server to new OES2sp1(SLES)
server. I want to use consolidate migration (no transfer ID) and my
scenario:
1. Installing DNS se | | 0 | 8 | 11/6/2009 8:08:17 PM |
DNS/DHCP Migration
I have a NW 6.5 server hosting my DNS/DHCP servers I was able to migrate
the DHCP server with little or no issues. The named server was also a
somewhat smooth migration process. Howeve | | 0 | 4 | 11/6/2009 8:08:15 PM |
Migrating DNS zones Solaris->OES2
I'm trying to migrate my DNS from Solaris to OES2 novell-named so I can
take advantage of some of the eDirectory features. I have set up my OES2
as a secondary to the Solaris machine h | | 0 | 5 | 11/6/2009 8:08:13 PM |