Multicast
When I try to multicast I get the error on the Master: Multicast
session already started. I use multicast quite often and this started
without an update or any other changes to Novel | | 0 | 28 | 11/6/2009 1:09:34 PM |
Image fails to restore
We have an images that appears to go up to the server, but when we
attempt to pull it down it appears to fail on a large file. Upon
further research when using image explorer, it appe | | 0 | 18 | 11/6/2009 1:09:33 PM |
OPEN CALL: Forge Driver Project
Hi,
don't know if you did know but there is a driver project on forge which
hosts a lot of drivers for the older imaging environements.
It was started by me but with the imp | | 0 | 12 | 11/6/2009 1:09:32 PM |
ZfD 401 IR7 - Image delete itself after successful write
Hello,
we use ZfD 4.0.1 IR7 and have this Problem:
After a successful write the Image delete itself.
Source-Hardware: Lenovo X200 / T500 / W700
Thanks | | 0 | 14 | 11/6/2009 1:09:28 PM |
Imaging 2.4.31
I got a Lenovo with Marvell Yukon network card model 88E8056. I compile
the sk98lin driver and add the right info in modules.config imaging
still do not regonize this card ... I don't | | 0 | 14 | 11/6/2009 1:09:27 PM |
Question about excluding one partition when restoring
We are using Zenworks 4.01 ir7 bootcd and the Zen Partition from the
bootcd.
Here's my img dump, using show geometry:
Number Device Name Partition Type | | 0 | 15 | 11/6/2009 1:09:25 PM |
Modify the initrd.gz file on Zenworks 4.01 ir7 bootcd
We are having issues with the Dell Optiplex 755 model with our Zenworks
4.01 ir7 bootcd but we found the issue.
By remming (using the # symbol) out certain lines in the install.s | | 0 | 15 | 11/6/2009 1:09:24 PM |
Dell Optiplex 755 model and Zen Partition install problem
We are using Netware 6.5 SP7 and Zenworks 4.01 ir7. We do not have the
time to upgrade to a newer Zenworks.
For the Dell Optiplex 755 we put the SATA Operation to legacy mode in | | 0 | 17 | 11/6/2009 1:09:23 PM |
SATA Drivers and SATA AHCI Drivers for Zen 4.01 ir7 Boot CD
Our Zenworks Server is Zen 4.01 ir7 and we use Zen 4.01 ir7 Boot CD at
our schools to install the Zen Parition which uses Linux Kernel 2.4.31.
I have no problem finding and compi | | 0 | 13 | 11/6/2009 1:09:22 PM |
Dell Optiplex 755
We are using Zenworks 4.01 ir7 and I have a Zen 4.01 ir7 bootcd made up
which uses the linux kernel 2.4.31.
I already compiled *(used Slackware 10.2 as it uses the linux kernel
< | | 0 | 13 | 11/6/2009 1:09:21 PM |
scripted imaging - choice.exe with time parameter for "bash"
Hi folks,
we use scripted imaging with a the "echo -n" choice command. with the
"echo -n" command a user interaction is requiered.
my problem is, t | | 0 | 11 | 11/6/2009 1:09:19 PM |
Unable to restore multi-partitioned image.
Hi all,
I have a dual-boot workstation with French and English Windows XP OS
and is setup as a graphic station.
I have created an image of this workstation using the Z | | 0 | 13 | 11/6/2009 1:09:12 PM |
no dhcp with zenworks imaging cd
Hi All,
I have a problem after a server change with the newest ZenWorks Imaging
CD and a Netware 6.5 SP7 server and ZenWorks 3.2 SP2. So I changed the
server this weekend fr | | 0 | 14 | 11/6/2009 1:09:11 PM |
SOS .......Newbe Please help........
Is there a very simple step by step complete instructions out there
to completely update my Zenworks Imaging Lenux kernel drivers etc...
to the most currant of system configs these day | | 0 | 18 | 11/6/2009 1:09:10 PM |
achat zocor belgique soft sans prescription
achat zocor belgique soft sans prescription
achat zocor canada belgique
acheter zocor suisse
acheter achat zocor canada bon marche en linge
un Achat de achat zocor us usa avec livr | | 0 | 55 | 5/18/2008 11:56:20 PM |
webhosting domain
webhosting domain
webhosting template
microsoft server
guter kostenloser webspace
windows terminal server
+
+
+
http://jhku.net/WEBSPACE-KOSTENL | | 0 | 69 | 5/18/2008 11:14:35 PM |
Problem Start Sled after restore dc5700
when i restore a dc5700 which are identical with different hard drive
which is from ata samsung to western digital, I have a wait for samsung
hard drive. The model are both dc5700 but is | | 1 | 51 | 5/10/2008 8:47:24 AM |
Unable to see .zmg image on USB external drive
While attempting to image a Tecra S2, I used a bootdisk to image the
laptop via the USB external hard drive. The image file was not
viewable but all other images on the external drive | | 1 | 45 | 5/6/2008 2:44:44 PM |
disabling the ZENworks imaging partition
I'm trying to disable the ZENworks imaging partition on all our workstations
to prepare for our Zen7 upgrade and pxe. I've gone into the properties of
the server policy, imaging server policy | | 3 | 61 | 3/25/2008 10:46:28 PM |
PXE Question
Can I use the updated zdm7 imaging files with my zfd4 pxe server? If so were
do I put them? Sys:\tftp
Thanks JasonH
P.S. We are moving to Zen7 after BrainShar | | 2 | 58 | 2/25/2008 2:06:49 PM |
e1000 driver for DC7800
Does anyone know where to find a compiled e1000 driver for zdf4.01 IR7
or how to compile one.
--
spoorepg
-------------------------------------------------------------- | | 3 | 118 | 2/19/2008 8:27:26 PM |
imaging stuck at 75%
We are using NW6 SP5 and zenworks 4.1, agent6. We have a machine with a
new hard
disk put in,we tried to image using multicast, it stopped at 25%. Then, we
imaged it directly from serve | | 4 | 59 | 2/13/2008 5:06:02 PM |
Increase TFTP RAMDISK Size for ZfD 4 Imaging
We recently ran into a problem after compiling/adding a NIC driver into
the Linux.2 file for use in PXE/TFTP imaging with ZENworks for Desktop
4.01 IR7.
(Yes, we will be going to | | 3 | 55 | 2/11/2008 4:19:58 PM |
ZFD3.2-SP3 Problems with Images on new big IDE-Disks?
After being happy with zfd3.2 for years now I stumbled into
problems recently after replacing older
workstation-ide-disks (between 17-36GB) with new models
(ranging 200-400GB). The Zen-Par | | 4 | 45 | 2/11/2008 11:31:17 AM |
new hardware
Hey all,
we have a probl
| | 1 | 58 | 1/4/2008 1:27:04 PM |
How to compile and add new modules
Hi,
for my ZfD 4.01 IR7 I want to add new drivers to kernel image (I use PXE).
Is there any HOWTO about this ?
Thanx
Lubomir Vogl
| | 1 | 53 | 9/25/2007 2:21:57 PM |
problem manually cd boot to image hp dc5700
I have problem bootup with my cd to image my hp dc5700. Does anyone have
a iso that work with the built broadcom card. I try looking at the tid
and it recommend that i put in the linux dri | | 5 | 60 | 9/24/2007 7:33:38 AM |
Using manual bootdisk to make image from a ASUS motherboards SATA drives???
Hi,
Does anybody know where I can find an answer how to modify my bootdisk
(doing a manual imaging of my PCs harddrive).
I have a ASUS motherboard A8N-SLI Premium
and my main driv | | 7 | 45 | 9/4/2007 8:47:52 AM |
Lenovo 3000 N200 imaging fails - no network adapter found
I was running ZEN 6.5. I have just upgraded all the way to ZEN SP1 but
still get the error. What can I do to make this work?
Jim
| | 2 | 55 | 8/29/2007 5:03:03 PM |
7.0.1 HP6 and GX270
I applied HP6 to our ZEN imaging server today to allow for imaging some
newer systems that we got in and it worked great. But now we can not
image our older Optiplex GX270s. Anybody know i | | 1 | 44 | 8/16/2007 6:35:40 PM |
PXE boot fails
All
I have an issue with PXE booting into zenwork imaging. Using zenworks
V4.0.1 when you boot the pc into zenworks maintence mode, the pc downloads
from the server until it get to " | | 5 | 67 | 8/14/2007 5:47:26 PM |
Dell Optiplex 745
Hello
Has anyone had any luck in getting the newest Broadcom nic in the Dell
Optiplex 745 to work with zfd 4.0.1 Ir7, kernel 2.4.28. I've found that
changing the bios setting for th | | 6 | 67 | 8/8/2007 4:35:58 PM |
Zen 4 imaging pmap and transaction server errors
Hi,
I am running Zen4 ir7 on a netware 65 sp5 server and trying to run use pxe at the workstation to get images to upload from new workstations. I am running into an error when pxe loads and gives | | 5 | 57 | 8/5/2007 2:08:27 PM |
Network Card not Found on New HP's
I am running Zen For Desktops 4.0 and I am trying to pull an image from
some new HP desktops we got that use the Broadcom Netxtreme gigabit
ethernet card. I am not able to get the boot CD t | | 2 | 61 | 8/1/2007 8:03:57 PM |
img exits immediately on new laptops
I just created loaded a new laptop from scratch and boot in to PXE to create
an image. After the linux kernels load I type img at the command prompt to
get in and create the image. I see t | | 3 | 68 | 7/27/2007 7:40:10 AM |
IBM M55 and Broadcom 5700 NIC
We have some new machines and the BCM 5700 nic is proving to be quite
stubborn.
We are running 4.01 sp1 zenworks.
I have downloaded the files from the forge for the Post IR5. | | 4 | 71 | 7/12/2007 8:08:44 AM |
Deploying XP with IDE and S-ATA
Hello,
anyone knows, what to do to deploy XP (Image) on worstations with serial ATA
/ IDE HDs?
Regards Udo
| | 2 | 51 | 7/11/2007 5:42:34 PM |
Computer Losing Information
Hi,
We are running Zenworks 4.01 ir7 and Netware 6.5 SP5.
Once a year I make a master image (zen image) of each model of computer in
our school.
I then take these maste | | 5 | 47 | 6/19/2007 1:38:55 PM |
proxyaddr environment cannot be resolved
I am trying to upload a Gateway M-85 image to my Novell proxy server from
a SuSe boot disk. I enter the same address I do when I image workstations
from the server, but I keep getting " | | 1 | 52 | 6/12/2007 11:34:22 AM |
Where is _full_ kernel source for 4.0.1-IR7?
Hello,
I wanted to add network drivers to our imaging CD. I've downloaded kernel
"sources" for Zen 4.0.1-IR7 from Novell downloads to discover that it's
only a patch again | | 1 | 50 | 6/5/2007 6:26:11 PM |
Nic Drivers. There has to be a better way!
Hi all,
I run 12 ZEN 4 IR6 networks all on NW 6.5 and have had nothing but trouble
finding linux files to get new machines to work on PXE imaging. I have
little to no experience with | | 5 | 59 | 5/31/2007 10:56:06 AM |
HP DC7700 and Siemens w350 with broadcom tg3.o (netxtreme 5755`)
Hello.
Has anyone had any luck in compiling and getting the newest Broadcom
driver to work? The Netxtreme 5755 card and the tg3 driver.
We are currently using zen4.01 Ir5. Ker | | 4 | 46 | 5/28/2007 1:34:26 PM |
Adding Linux Network Driver to Boot CD
Hi,
We are curretnly using Zenworks 4.01 ir7 which uses kernel 2.4.31.
We got several Dell Optiplex 745 computers in which uses the newest
Broadcom Network Driver.
I ve | | 1 | 63 | 5/18/2007 6:43:38 PM |
Slackware 10.2 Zen Image
Hi,
We use Zenworks 4.01 ir7.
I made myself a linux box using Slackware 10.2 because it uses the kernel
2.4.31 by default which is also the kernel for Zenworks 4.01 ir7.
| | 1 | 60 | 5/16/2007 1:50:50 PM |
No network device found
We have just recieved a batch of workstations built around an Intel
D945GCCR desktop board
(http://www.intel.com/products/motherboard/D945GCCR/index.htm) but are
having problems imaging | | 5 | 48 | 5/16/2007 1:49:31 PM |
Lenovo T60's imaging
Hi
We just purchased a bunch of T60's with the Intel Pro/1000 PL NIC. Not
having any luck so far with getting this to work with Zen 4.1 ir7 (nw 6
sp5). Have not had any luck yet wi | | 1 | 44 | 5/4/2007 8:40:51 AM |
Imaging from Console One
Hi,
We are running Netware 6.5 SP5 and Zenworks 4.01 ir7.
We have Zen Partitions installed on all our computers and we have a local
image saved on the zen partition which has be | | 1 | 66 | 4/27/2007 4:25:48 PM |
BaseBoot CD ISO for Linux 2.4.31
Hi, we are having trouble finding any Linux Boot CD with a Kernel that
supports our newer computers specifically the network card. So does
anyone have a Linux Kernel 2.4.31 as a base boot I | | 1 | 56 | 4/17/2007 4:10:53 PM |
HP DC7700
Based on what I've read on the net, a lot of people are having trouble
with these machines.
We're running an older instance of ZfD 4. I was finally able to construct
a boot CD that works | | 1 | 54 | 4/15/2007 1:30:44 PM |
Intell 945GTP NIC and SATA support, Zen 4.01 ir4a linux partition
We are in DESPERATE need of drivers that will recognize the NIC and SATA
drives on an Intel 945GTP motherboard. Also, it needs to work via the
locally installed linux partition. (no PXE or | | 1 | 48 | 4/4/2007 10:05:38 PM |